Sheep Shearing Machine Review

0

1984

Article rating

Manual shearing of sheep has long been fading into the background - now every self-respecting farmer has an electric shearing machine for sheep wool. Before proceeding with the description of the models of machines, you need to understand what points and characteristics you need to pay attention to when choosing what the ideal machine for shearing sheep should be.

Electric Sheep Clipper

How to choose the right sheep clipper

If you have purchased sheep for breeding, you should deal with the question of how to properly cut their wool in a non-manual way. The first thing you need is a sheep clipper. Faced with the question of choosing a model, you can see that the range is wide enough, because each device has its own characteristics, pros and cons.

It is not only those sheep whose fleece is being prepared for sale are sheared. It is also necessary to cut those individuals who are kept exclusively for meat. The fact is that over time, the animal's hair acquires an untidy look, it may contain thorns, burdocks and other dirt. In addition, such a condition of the coat can lead to the fact that a variety of painful microorganisms can start in it. A large number of skin diseases begin due to inadequate care of the sheep's wool.

Choosing a Sheep Clipper

The electric sheep shearing machine is designed to greatly facilitate the work of the sheep breeder. Of course, a manual sheep clipper cannot be compared in terms of convenience to modern electric ones. It is important that it meets expectations, because the set of characteristics for each of the models will be different. When choosing, you need to pay attention to the power of the device, technical characteristics, additional functions, and so on.

Main Features of Sheep Clipper

It is customary to refer to the main characteristics:

• power;
• availability of a guarantee;
• availability of consumables and spare parts;
• the convenience of use.

Power

Currently, the variety of capacities is great, since the device is designed for different loads and operating times. If you need to cut no more than 10-20 sheep, then there is no point in purchasing an expensive high-power shearing machine, you can get by with a simpler model. The simpler word here refers only to power, but not to the quality of the device in general.

If there are more than a dozen individuals on the farm, you need to buy a car with high power, because the load on it will be consistently frequent. It is not recommended to save on the device in this situation, because, as you know, a stingy person pays twice. On the Internet, you can often find reviews that the farmer purchased a low-quality machine that broke down in the first month of use.Quite often, after the trial, it turns out that a dozen, or even more, sheep were sheared in a row with a shearing machine without pause.

Manufacturer's warranty obligations

It is worth paying attention to this aspect when buying, since the guarantee can only be provided by the manufacturer who is confident in the quality of the product being manufactured, and is also ready to carry out its further maintenance and repair. This is also important because even a machine of the most popular brand can fail, simply because it happens. In this case, the guarantee will come in handy more than ever.

Availability of spare parts and consumables

In addition to the warranty, you should pay attention to whether spare parts are sold for the selected device. It so happens that livestock breeders order a shearing machine, for example, from abroad, and then they are faced with the fact that it is simply impossible to buy spare parts for it in the Russian Federation.

Any product has its own term of use. For example, sheep clipper knives are usually the first to fail. It's good if the farmer has the ability to easily buy new ones when needed. Most consumers pay attention to this aspect already at the breakdown stage. Advice from experienced farmers: it is recommended to abandon the purchase if the store cannot provide information about the product and spare parts for it.

Convenience

This characteristic is one of the most important for the consumer, because sheep shearing machines must first of all be comfortable. They should fit comfortably in the hand, have a sufficiently long electrical wire and several attachments to adjust the length of the coat. In addition, you need to pay attention to how easy it is to disassemble the apparatus for cleaning or occasional oiling.

Many manufacturers point to the presence of an overload fuse as one of the advantages of the machine. Is it really that important? Yes, it is recommended to give preference to just such models, because they protect the device from overheating and overload. If there is no such fuse, in case of overheating or overload, it can simply burn out, normal repair of the product will no longer fix this.

Now let's move on to a description of the most popular models, their characteristics, as well as the main pros and cons.

Kyson 500

General characteristics:

• power - up to 500 W;
• the number of revolutions - a maximum of 3200 per minute;
• maximum load in one season - up to 450 sheep;
• manufacturer - America;
• price - about 12 thousand rubles;
• the warranty is provided for one year.

The model cannot be called popular, because the manufacturer does not invest financial resources in marketing and advertising, preferring to work more on quality. Usually they fall in love with her immediately after being picked up. The fact is that it has a comfortable ergonomic design, as a result of which it fits in the hand and does not slip out when shearing a sheep or ram. After that, all doubts that could remain until this moment will be dispelled.

In the opinion of many farm owners, at present this is one of the most successful models in which the ratio of price and quality is rationally combined, and some German models, for example, the clipper and heiniger, can also boast of this. Previously, for such a price, it was possible to buy only Chinese models, which fell into disrepair during the first months of operation. As for this American manufacturer, there are simply no negative reviews about its use.

Kyson 300

This model is made in America, it has its own characteristics that can be compared with the previous model earlier. The first thing you need to pay attention to is the shape of the body, now it is even more comfortable, since there is a special bend for the fingers of the hand. Now that the machine is in the hands of the farm worker, the machine is even more comfortable. In addition to the bending of the body, a rubber gasket has appeared, which will not allow the machine to be dropped from a sweaty hand.

Also innovations concern the head of the machine, now its head becomes lighter, as it is made of plastic. The device itself is made of metal, which adds durability to the device. In addition, it is worth mentioning the presence of a screw that performs a regulating function. With this screw, you can easily adjust the operation of the machine for any thickness and length of wool.

The Kayson 300 model also has a gearbox made of metal. At present, this method of the device is the most convenient and durable, since it quickly and easily converts the twisting motion into oscillatory motion, which significantly increases the efficiency. If the system is set up right away, such a machine can run almost forever. Only 10 thousand rubles. needed to buy the Kyson 300 at this time.

How the engine works in a sheep shearing machine

The Kayson 300 and Kayson 500 models differ in power, as evidenced by the prefix in the form of a number: in the first case it is 300 watts, in the second - 500 watts. More power gives much more performance. This means that without interruption, you can cut a dozen, or even more, sheep at once.

In these models, a cooling system has been developed, which is designed to prevent engine overheating. The same function is performed by a special overload protection system. So you can know exactly when the device needs to rest and cool down.

Sheep shearing process

It is worth saying that for a large farm it is best to purchase the second model, that is, the Kayson 500. Farmers claim that this machine simplifies the process of shearing cattle as much as possible. The fact is that it is made in such a way that it not only cuts easily, but also makes the process as comfortable as possible. For example, her work is almost impossible to hear, she works silently.

Characteristics of the Kyson 500 model

The main characteristics of the Kyson 500 model include the following:

• power - 500 W;
• revolutions per minute - 3200;
• the presence of filters - 1 pc., air;
• gear shifting - there are only 6 of them;
• the knife version is standard, like a comb, and there is an adjustment of the knives.

Included with the machine itself is a suitcase, which makes the storage process of the device convenient and ergonomic. In addition, the set includes:

• replaceable knives for shearing sheep;
• screwdriver for disassembling removable parts;
• graphite brushes;
• oiler with machine oil;
• instructions for use.

Description of Chinese Sheep Clipper

For comparison, we present the description and technical characteristics of a Chinese-made sheep shearing machine called TiDH 240:

• maximum power - 320 W
• number of revolutions - 2400 rpm
• maximum load - 5 dozen goals in one season
• price - about 8000 rubles
• speeds - one speed
• availability of a guarantee - there is;
• the warranty period is one year.

The set comes directly with the machine itself, 2 replaceable knives, an oil can with oil, as well as brushes for cleaning the knives.

It is worth saying that, despite the prejudiced attitude of consumers towards goods from China, this model behaves well in operation. The only drawback that is found in negative reviews is that there are no additional conveniences in it: the case will be somewhat heavier compared to the models described above, and nothing has been thought out in the design for ease of use.

Description of the professional hair clipper EWE 3000

The main technical characteristics of a professional typewriter are as follows:

• device power - no more than 650 W;
• the number of revolutions - a maximum of 3500 per minute;
• maximum machine load - no more than 600 individuals in one season;
• device manufacturer - UK;
• price - 18 thousand rubles; for comparison, the cost of the domestic Russian LSG is only 5 thousand rubles;
• 2-year warranty plus end-of-life repair service.

This model is the best professional sheep and ram shearing machine, used by farmers when keeping a large number of sheep. It is noted that dimi EWE 3000 can be used even in the case of industrial sheep breeding. The fact is that the machine is made in such a way as to withstand maximum loads, it can work for a long time without pauses and breaks.

The design of the sheep shearing device is thought out to the smallest detail. Thus, the risk of the device falling out of the hand is minimized as much as possible, due to the fact that special materials were used in the production. The length of the cord is about 5 m - there is no need to use additional extension cords when shearing animals.

This model can be used not only for sheep, but also for other domestic animals: horses and even dogs. It accompanies the execution of any non-manual haircut and the fact that there are several knives in the kit. In addition, the case with the machine contains a standard oiler, graphite brushes, several brushes for cleaning the device, and an annotation for use.

In addition to the above machines in veterinary stores, you can find the following: made in Russia - Hurricane, Whirlwind, MSU (MSU often do it yourself), as well as foreign-made zxs, lacoste, berger (German production), takumi, forza, sc gts, xpert, heiniger other.

Consumable parts for a typewriter

The only thing that requires periodic replacement or sharpening is the knives. The fact is that over time they can become dull due to constant friction against each other. Of course, these are not scissors, which are the only alternative to an electric machine, scissors can serve for more than a dozen years, only periodic sharpening of the cutting pair is required. You can sharpen knives yourself at home, but it is recommended to entrust sharpening to a professionally trained person.

It should be said that both the scissors and the sheep shearing knives are made of high-carbon steel, which makes the product very strong and extremely durable.